I was out last Sunday, flying around in some excellent spring air conditions. After about 45 minutes of flying I decided to head in. The usual pattern, etc, but on final I was higher than normal.
As I honked it in on my right down tube, my glove slipped off the aluminum tubing. I'm using some motocross gloves that have a smooth, pitted cloth across the palm and fingers. That's never happened before. Time lost, I immediately switched to both hands on the control bar and brought it in to my waist. I landed without incident.
I decided to look into this grip thing and think I've found a good solution. It's called TEGS. It's a gripping system that requires the TEGS product on both the gloves and the surface you need to grip. Kind of like mini-vlecro, with instant release. Or so they say.
I went here and purchased some tactical TEGs grip gloves and some tape to wrap on my down tubes and control bar. I realize this might add some parasitic drag, but I'd rather be safe and in control when I need it most. Check it out and I'll let folks know how it goes once I've got it in the air.
https://loftactical.com/shop/sentry-glove/
Sticky Fingers
Moderator: Chip
- Steve90266
- Posts: 488
- Joined: Fri Nov 30, 2007 6:05 pm
- Location: Manhattan Beach
- Contact:
Sticky Fingers
Steve Murillo
- gregangsten
- Posts: 502
- Joined: Thu Jun 02, 2005 11:22 am
- Location: Westchester
glove grip
I've been happily using Mad Grip gloves for flying. They are as sticky as you'll ever want and only around $10 a pair. Search for them at Home Depot (online) or Lowe's.
- Steve90266
- Posts: 488
- Joined: Fri Nov 30, 2007 6:05 pm
- Location: Manhattan Beach
- Contact:
Sticky Fingers
I got the gloves and the tape. Tried them out and they work great. I just ordered more tape to put on the down tubes.
I had gloves from Home Depot that I used for years. They finally gave up the ghost, so I thought I'd try something more technical.
The only draw-back: The gloves act like velcro. So when I pull on my harness cords, the end piece doesn't want to let go of my glove. Kinda like trying to get rid of a sticky booger.
The trades we make. Hoy.
I had gloves from Home Depot that I used for years. They finally gave up the ghost, so I thought I'd try something more technical.
The only draw-back: The gloves act like velcro. So when I pull on my harness cords, the end piece doesn't want to let go of my glove. Kinda like trying to get rid of a sticky booger.
The trades we make. Hoy.
Steve Murillo
- gregangsten
- Posts: 502
- Joined: Thu Jun 02, 2005 11:22 am
- Location: Westchester
Mad Grip
The only drawback I've found with the Mad Grip gloves is their durability. Not good, especially on your string-pulling hand, but still definitely worth it.