The ROOF framing and sealing the wood

Talk about anything hang gliding.

Moderator: Chip

Post Reply
User avatar
skygeek AKA Seabass
Posts: 252
Joined: Thu Dec 21, 2006 9:34 pm
Location: Newhall
Contact:

The ROOF framing and sealing the wood

Post by skygeek AKA Seabass »

The roof framing, T&G & fascia looks to be done. Thanks to Tom and volunteers it came out awesome.
Who has a good sprayer, sanders and plenty of tarps we need to seal the ceilings. There are some areas of the big beams that have black smears that need to be sanded prior to sealing.
User avatar
Jim
Posts: 289
Joined: Fri Apr 09, 2010 5:08 pm

Post by Jim »

Seabass,
Rob has my airless sprayer. It works well but I'd appreciate it, if you take care of it after use. I think I have the preservative in the box for storage after cleaning. It works best with the siphon immersed in a 2-5 gallon bucket of paint. It is not a good tool for detail but covers large areas quickly.
Whoever uses it, wear the proper filter mask, long sleeves and goggles. You probably have coveralls, anyway. I heard a good painter's tip is to apply Vaseline to any exposed skin, particularly, the face.
User avatar
Glenn
Posts: 354
Joined: Fri Apr 29, 2005 2:02 pm
Location: Westchester, CA

Post by Glenn »

Cover the railing where it's not covered, and the statue, please !
Flyyyyy
User avatar
Jim
Posts: 289
Joined: Fri Apr 09, 2010 5:08 pm

Post by Jim »

Yeah, Glenn, about the glider sculpture... I was thinking it would look good in color,say, fluorescent green, black and blue, no?
:twisted:
Wayne
Posts: 20
Joined: Thu Jun 08, 2006 7:15 am
Location: up the street

Post by Wayne »

I've never posted a photo on this forum yet, not knowing exactly how, but with Chippy's prompting here's a try at it. Here's Tom at the scene of the crime.

Wayne
(hope this works)

Image
User avatar
skygeek AKA Seabass
Posts: 252
Joined: Thu Dec 21, 2006 9:34 pm
Location: Newhall
Contact:

Post by skygeek AKA Seabass »

When were done that picture should be hanging in the Pavillion that's one bad ass Dude!
User avatar
OP
Posts: 1134
Joined: Wed May 27, 2009 9:28 am
Location: SFV

Post by OP »

That thing will withstand...
Image
User avatar
BudRob
Posts: 365
Joined: Wed Oct 26, 2005 6:40 pm

Post by BudRob »

Back to the topic of roof sealing - Richard Shaw is making preparations to clean and seal all the beams and roof underside. Thanks Richard!

And while we wait for the roofing material to arrive, there is lots of other work to be done: Both the A and B storage boxes are showing lots of rust and need to be painted. George Boswell is checking into getting some rubberized sealer for the top of the B box and we already have rustolium primer and home good oil base grey paint. Watch for a work party call this coming weeked.
Post Reply